Spray-On Roof Coating

A single, seamless armor over your entire RV roof — no seams to crack, no edges to peel, no leaks to chase. Built for the long haul.

The Problem

Factory RV roofs are stitched together with sealants and seamsthat fail with sun, heat cycling, and miles. Once water gets in,soft spots, delamination, and interior damage follow fast — andrepairs get expensive.

Our Fix

We strip the roof down, repair what's tired, and lay down anindustrial-grade elastomeric coating in one continuousmembrane. No seams. No gaps. Just one monolithic layer ofarmor backed by a reflective UV topcoat.

Spray-On Roof Coating

What's Included

Every job. No upsells. No surprises.

Why It Works

Built-In Benefits

100% Waterproof

Monolithic membrane flexes with your rig — no cracks, no leaks, no chasing seams.

UV Defense

Reflective topcoat blocks heat-driving rays, dropping interior temps and extending roof life.

Thermal Stable

Holds bond through -40°F to 200°F. Freeze, bake, repeat — it stays put.

Impact Resistant

Shrugs off hail, branches, and ladder traffic that would tear up factory membranes.

Lightweight

Adds armor without piling on weight. Tow-friendly and balanced.

Repair-Friendly

Patch and recoat in place — no tear-off required years down the road.

The Process

How We Do It

01

Inspect

Top-to-bottom assessment of yourexisting roof, seams, vents, andseals — with photos.

02

Prep

Pressure wash, repair soft spots,replace damaged sealant, primeevery surface.

03

Spray

High-build elastomeric coatingapplied in even, monolithic layers— edge-to-edge.

04

Protect

Reflective UV topcoat seals thedeal. We re-trim vents and you roll home.

The Specs

By the Numbers

10+ yr

Coating lifespan

100%

Seamless seal

1 day

Typical turnaround

~85%

UV reflectivity

FAQ

Common Questions

How long does the application take?

Most RV roofs are completed in a single day. Larger Class A units or rigs needing extensive prep may take two days.

EPDM, TPO, fiberglass, and aluminum roofs all accept our system. We adjust prep and primer for each substrate.

Properly applied and maintained, the system carries a 10+ year service life. We recommend a quick inspection annually.

No. The full system typically adds under 40 lbs to most rigs — well within any payload margin.

Yes. Cure time is usually 24 hours before normal use; routine ladder access is fine after that.

Workmanship is warrantied by Armor Up RV, and the coating itself carries a manufacturer warranty. Details handed over with your care guide.

The Specs

By the Numbers

Sidewall Sealing

Lock out water at every window and trim line.

Underbody Protection

Shield your frame from rust and road debris.

Slide-Out Service

Smooth, sealed, and aligned — every cycle.

Ready to Armor Up?